Push Back Rack Storage Systems - High Density Storage

Push Back Rack Storage Systems
Higher Density Storage Systems - Push Back Rack Storage - Greater Storage System Flexibility

Storage Systems for General warehousing, distribution, and logistics. Commercial, Industrial and Institutional applications from grocery dry goods and cold storage to public warehousing and distrbution.

Home	Open an Account	Ordering Info	Order Form	Customer Service	Contact Us

3 D Storage Systems
3D Storage Systems uses a unique design, that provides trouble free operation as well as extensive built-in safety features. Structural steel construction ensures long life in tough warehouse environments.

SYSTEM FLEXIBILTY: 3D Steadiflo is available in 2,3,4,5 and 6 deep styles and can be arranged as back to back islands or stand alone bays. Number of levels high restricted only by lift truck reach. No special fork trucks are required. Pushback systems are fully operational in freezers, coolers and high temperature environments.

When the average number of pallets per product exceeds five, a pushback system is easily justified. The higher the number, the deeper the lane is feasible (usually 3 lanes per product minimum). These multiple lanes allow rotation to achieve First in First out. Steadiflo pushback systems can be configured to attain up to 100% more pallets stored than standard pallet racking and equal or greater increases over poorly occupied drive-in or floor storage configurations.

STEADIFLO PUSHBACK

Low Profile - Steadiflo has a lower profile than other cart type systems, allowing for extra lift clearance.
	Lift-out Protectors - Each cart is equipped with lift-out protectors, which prevent accidental dislodgment of a cart by the fork lift operator.
Linked carts - Carts are linked when extended, eliminating the possibility of single pallet hang-ups. Without this feature the potential for damage to product or personal injury, is obvious. No pushback product is complete without this important safety feature.
	Flanged steel wheels - Our wheels are manufactured from solid steel and are equipped with heavy duty bearings. Sturdy 5/8" shafts are welded to the carts and are oversized to withstand shock loading, capacities of up to 1,400 lbs. per wheel.
Multipurpose plate Lane full Indicator - The operator can tell if a lane is full by the absence of the Safety Stop. If it is not showing at the front, the last cart has been loaded and there is a pallet on the rails - a full lane.
	Strip-off Stop - If, after placing a pallet, the operator has his forks in an improper tilt position, the Safety Stop will catch the bottom of the pallet and "strip" it off the forks. End Stop - The safety stop, which is situated on the lowest cart and protrudes 3/4" above the highest cart, prevents pallets from shifting beyond the front load beam. Height gauge - When loading a pallet, the operator knows that the load is high enough to clear the safety stop, then the pallet will not prematurely move the awaiting cart.